Please start any new threads on our new
site at https://forums.sqlteam.com. We've got lots of great SQL Server
experts to answer whatever question you can come up with.
| Author |
Topic |
|
DBKing
Starting Member
8 Posts |
 Posted - 2006-02-27 : 05:41:19
|
| HiI have a windows 2000 HP-Compaq Server (Proliant ML530) which I have installed the Windows 2k windows component: Network monitor. However I still cannot see the Network Interface object in performance monitor.Does anyone have any ideas why this is ?Regards |
|
|
JoeNak
Constraint Violating Yak Guru
292 Posts |
Posted - 2006-02-27 : 10:16:01
|
| Try this...http://www.microsoft.com/technet/prodtechnol/exchange/Analyzer/729724ee-2ace-456c-a64c-26045c55a329.mspx |
 |
|
|
DBKing
Starting Member
8 Posts |
Posted - 2006-02-27 : 12:09:22
|
| I've had a look at that article and used the exctrlst.exe application but I cannot identify the DLL used for the Network Monitor. Any ideas ?BTW, the network card in my server is a NC7770. I have looked all over the HP site and all it says is the Network monitor is enabled or disabled by the software. Coincidently, I can the install enabled the Network Monitor application which I can use and view the network traffic in and out of my server. However, like i said, the perfmon monitor object and counters are not being displayed. |
|
|
|
JoeNak
Constraint Violating Yak Guru
292 Posts |
|
|
DBKing
Starting Member
8 Posts |
Posted - 2006-02-28 : 04:21:43
|
| Ok. Found the solutions thanks to Igor Karasik on the HP Forums. I needed to use exctrlst.exe (http://www.microsoft.com/windows2000/techinfo/reskit/tools/existing/exctrlst-o.asp) to enable the counter. |
|
|
|
|
|
|
Network monitor object in performance monitor