Update from Summation of Another Table's Values

Please start any new threads on our new site at https://forums.sqlteam.com. We've got lots of great SQL Server experts to answer whatever question you can come up with.

All Forums

General SQL Server Forums

New to SQL Server Programming

Update from Summation of Another Table's Values

Author

Topic

lueylump
Starting Member

25 Posts

Posted - 2010-03-25 : 08:24:02

I have a situation that I am updating one table with summation values from another table and am getting the following error:

Msg 4104, Level 16, State 1, Line 4
The multi-part identifier "C.Part_Nbr" could not be bound.
Msg 4104, Level 16, State 1, Line 4
The multi-part identifier "C.Part_Nbr" could not be bound.

Below is the code I am using and any assistance is greatly appreciated.

UPDATE Part
SET Part_On_Hand_Qty = On_Hand_Qty,
Part_Cmttd_Qty = Cmttd_Qty,
Part_Loss_Qty = Loss_Qty,
Part_Scrap_Qty = Scrap_Qty,
Part_Surplus_Qty = Surplus_Qty,
Part_Avail_Qty = Avail_Qty
FROM (Select C.Part_Nbr,
sum(RMI_On_Hand_Qty) as On_Hand_Qty,
sum(RMI_Cmttd_Qty) as Cmttd_Qty,
sum(RMI_Loss_Qty) as Loss_Qty,
sum(RMI_Scrap_Qty) as Scrap_Qty,
sum(RMI_Surplus_Qty) as Surplus_Qty,
sum(RMI_Avail_Qty) as Avail_Qty
from Raw_Matrl_Inv
group by C.Part_Nbr) C
where Part.Part_Nbr = C.Part_Nbr

webfred
Master Smack Fu Yak Hacker

8781 Posts

Posted - 2010-03-25 : 08:33:01

quote:
Originally posted by lueylump

I have a situation that I am updating one table with summation values from another table and am getting the following error:

Msg 4104, Level 16, State 1, Line 4
The multi-part identifier "C.Part_Nbr" could not be bound.
Msg 4104, Level 16, State 1, Line 4
The multi-part identifier "C.Part_Nbr" could not be bound.

Below is the code I am using and any assistance is greatly appreciated.

UPDATE Part
SET Part_On_Hand_Qty = On_Hand_Qty,
Part_Cmttd_Qty = Cmttd_Qty,
Part_Loss_Qty = Loss_Qty,
Part_Scrap_Qty = Scrap_Qty,
Part_Surplus_Qty = Surplus_Qty,
Part_Avail_Qty = Avail_Qty
FROM (Select C.Part_Nbr,
sum(RMI_On_Hand_Qty) as On_Hand_Qty,
sum(RMI_Cmttd_Qty) as Cmttd_Qty,
sum(RMI_Loss_Qty) as Loss_Qty,
sum(RMI_Scrap_Qty) as Scrap_Qty,
sum(RMI_Surplus_Qty) as Surplus_Qty,
sum(RMI_Avail_Qty) as Avail_Qty
from Raw_Matrl_Inv
group by C.Part_Nbr) C
where Part.Part_Nbr = C.Part_Nbr

No, you're never too old to Yak'n'Roll if you're too young to die.

khtan
In (Som, Ni, Yak)

17689 Posts

Posted - 2010-03-25 : 08:34:14

[code]
UPDATE Part
SET Part_On_Hand_Qty = On_Hand_Qty,
Part_Cmttd_Qty = Cmttd_Qty,
Part_Loss_Qty = Loss_Qty,
Part_Scrap_Qty = Scrap_Qty,
Part_Surplus_Qty = Surplus_Qty,
Part_Avail_Qty = Avail_Qty
FROM (
SELECT C.Part_Nbr,
SUM(RMI_On_Hand_Qty) AS On_Hand_Qty,
SUM(RMI_Cmttd_Qty) AS Cmttd_Qty,
SUM(RMI_Loss_Qty) AS Loss_Qty,
SUM(RMI_Scrap_Qty) AS Scrap_Qty,
SUM(RMI_Surplus_Qty) AS Surplus_Qty,
SUM(RMI_Avail_Qty) AS Avail_Qty
FROM Raw_Matrl_Inv C
GROUP BY C.Part_Nbr
) C
WHERE Part.Part_Nbr = C.Part_Nbr
[/code]

KH
[spoiler]Time is always against us[/spoiler]

khtan
In (Som, Ni, Yak)

17689 Posts

Posted - 2010-03-25 : 08:34:53

similar changes. I add, you remove

KH
[spoiler]Time is always against us[/spoiler]

bhaskarvarada
Starting Member

8 Posts

Posted - 2010-03-25 : 08:36:43

Hi lueylump,

U have used the Alias 'C.Part_Nbr' inside the Sub Query ,Dont use the Alias use Raw_Matrl_Inv.Part_Nbr

UPDATE Part
SET
Part_On_Hand_Qty = On_Hand_Qty,
Part_Cmttd_Qty = Cmttd_Qty,
Part_Loss_Qty = Loss_Qty,
Part_Scrap_Qty = Scrap_Qty,
Part_Surplus_Qty = Surplus_Qty,
Part_Avail_Qty = Avail_Qty
FROM (Select Raw_Matrl_Inv.Part_Nbr,
sum(RMI_On_Hand_Qty) as On_Hand_Qty,
sum(RMI_Cmttd_Qty) as Cmttd_Qty,
sum(RMI_Loss_Qty) as Loss_Qty,
sum(RMI_Scrap_Qty) as Scrap_Qty,
sum(RMI_Surplus_Qty) as Surplus_Qty,
sum(RMI_Avail_Qty) as Avail_Qty
from Raw_Matrl_Inv
group by Raw_Matrl_Inv.Part_Nbr) C
where Part.Part_Nbr = C.Part_Nbr

Regards

lueylump
Starting Member

25 Posts

Posted - 2010-03-25 : 08:56:21

IT WORKS!!!!!

Thank You! Thank You! Thank You!

webfred
Master Smack Fu Yak Hacker

8781 Posts

Posted - 2010-03-25 : 09:02:33

quote:
Originally posted by bhaskarvarada

Hi lueylump,

U have used the Alias 'C.Part_Nbr' inside the Sub Query ,Dont use the Alias use Raw_Matrl_Inv.Part_Nbr

UPDATE Part
SET
Part_On_Hand_Qty = On_Hand_Qty,
Part_Cmttd_Qty = Cmttd_Qty,
Part_Loss_Qty = Loss_Qty,
Part_Scrap_Qty = Scrap_Qty,
Part_Surplus_Qty = Surplus_Qty,
Part_Avail_Qty = Avail_Qty
FROM (Select Raw_Matrl_Inv.Part_Nbr,
sum(RMI_On_Hand_Qty) as On_Hand_Qty,
sum(RMI_Cmttd_Qty) as Cmttd_Qty,
sum(RMI_Loss_Qty) as Loss_Qty,
sum(RMI_Scrap_Qty) as Scrap_Qty,
sum(RMI_Surplus_Qty) as Surplus_Qty,
sum(RMI_Avail_Qty) as Avail_Qty
from Raw_Matrl_Inv
group by Raw_Matrl_Inv.Part_Nbr) C
where Part.Part_Nbr = C.Part_Nbr

Regards

There is no need to use an alias inside this subquery.

No, you're never too old to Yak'n'Roll if you're too young to die.

webfred
Master Smack Fu Yak Hacker

8781 Posts

Posted - 2010-03-25 : 09:03:23

quote:
Originally posted by lueylump

IT WORKS!!!!!

Thank You! Thank You! Thank You!

welcome

No, you're never too old to Yak'n'Roll if you're too young to die.

Subscribe to SQLTeam.com

SQLTeam.com Articles via RSS

SQLTeam.com Weblog via RSS

- Advertisement -

Resources